MS
search
Find Metal Stamping companies     
Find Metal Fabricating companies
Find Slide Forming companies
Find Spring Coiling companies
Find Metal Spinning companies
Find Custom Rolling companies
Find Hydroforming companies
Find Small-Lot Stamping companies
Find Washer Manufacturing companies
Find Tool and Die companies
Search by markets
search by country
Search all manufacturers
 

PMA Members - Update your
company profile

 

Profile: VALCO/VALLEY TOOL & DIE CO.
VALCO/VALLEY TOOL & DIE CO. 
10020 York Theta Dr
North Royalton, OH  44133-3535 USA

 
Phone: (440)237-0160
Fax: (440)237-0089
Toll Free: (800)860-2370
Website: www.valcocleve.com



Size of Facility (sq.ft):  43,000
Number of Employees:  80

Contact Information
Primary Contact:
Mr. Adolf Eisenloeffel

President

Phone: (440)237-0160
Fax: (440)237-0089
E-mail: ae@valcocleve.com
Secondary Contact:
Mr. Helmut Eisenloeffel

Vice President

Phone: (440)237-0160
Fax: (440)237-0089
Company Information
Manufacturers of Valco snap buttons, fasteners for telescoping tubing. Slideforming, punch-presses to zooton, Engineering and parts development, tool & die capability, wire EDM service.
Electronic Capabilities & Third Party Certifications
Electronic Capabilities:
  • Electronic Data Interchange (EDI)
  • Computer Aided Design (CAD)
  • E-Mail
Third Party Certifications:
  • No third party certifications specified.
Primary Markets Served
  • Electronics
  • Computers/Business Machines
  • Telecommunications
  • Automotive Tier 2
  • Automotive After-Market
  • Consumer Products
  • Lawn & Garden
  • Off-Highway
  • Medical Instruments
  • Appliance
  • Commercial/Industrial Hardware
  • Produce Own End Product
Metal Stamping
Type of Stamping Operation(s) Performed:
  • Single-Stroke Production
  • Progressive
Stamping Press Characteristics:

Maximum Press Size:
61 to 200 tons

Maximum Bed Length:
61 to 120 inches

Maximum Bed Width:
25 to 48 inches

Maximum Stroke Height:
7 to 12 inches

Value-Added Operations:
  • Tool & Die
  • Heat Treating
  • Machining
  • Finishing
  • Welding
  • Mechanical Assembly
  • Electrical Assembly
Slide Forming
Machine Capabilities: Wire

Maximum Diameter:  0.021 to 0.100 inches
Maximum Feed Length:  10.1 to 24.0 inches

Machine Capabilities: Strip

Maximum Thickness:  0.051 to 0.100 inches
Maximum Width:  1.01 to 2.00 inches
Maximum Feed Length:  10.1 to 24.0 inches

Material Used:
  • Non Ferrous
  • Ferrous
  • Non Metal
Value-Added Capabilities
  • Tool & Die
  • Finishing
  • Secondary Operations
  • Heat Treating
  • Prototyping
  • In-line Tapping
  • In-Line Mechanical Assembly
  • Special Packaging

 

PMAPrecision Metalforming Association, 6363 Oak Tree Blvd., Independence, OH 44131-2500 
Phone: 216-901-8800 —
copyright 2006
Precision Metalforming Association   All Rights Reserved   Legal Page    Privacy Policy