Find Metal Stamping companies     
Find Metal Fabricating companies
Find Slide Forming companies
Find Spring Coiling companies
Find Metal Spinning companies
Find Custom Rolling companies
Find Hydroforming companies
Find Small-Lot Stamping companies
Find Washer Manufacturing companies
Find Tool and Die companies
Search by markets
search by country
Search all manufacturers

PMA Members - Update your
company profile


29980 Lakeland Blvd
Wickliffe, OH  44092-1744 USA

Phone: (440)943-3040
Fax: (440)943-8814

Size of Facility (sq.ft):  120,000
Number of Employees:  200

Additional Member Locations
Contact Information
Primary Contact:
Mr. John Vitale

Sales Coordinator

Phone: (440)943-3040
Fax: (440)943-8814
Company Information
Manufacturer of flat springs, metal stampings, hose clamps, small assemblies. Have tool building capability. We have recently upgraded our website to include Spanish translation and support for our neighbors to the south. A growing percentage of our shipments are into Mexico, Latin America and Brazil. The Pharr, Texas facility was recently awarded certification for ISO14001:2004. This certification is in addition to existing ISO9001 and TS16949 certifications currently held by all three manufacturing locations.
Electronic Capabilities & Third Party Certifications
Electronic Capabilities:
  • Electronic Data Interchange (EDI)
  • Computer Aided Design (CAD)
  • E-Mail
Third Party Certifications:
  • ISO9001, ISO14001,TS16949
Primary Markets Served
  • Automotive Tier 1
  • Automotive Tier 2
  • Appliance
Metal Stamping
Type of Stamping Operation(s) Performed:
  • Single-Stroke Production
  • Progressive
Stamping Press Characteristics:

Maximum Press Size:
201 to 600 tons

Maximum Bed Length:
61 to 120 inches

Maximum Bed Width:
61 to 120 inches

Maximum Stroke Height:
13 to 20 inches

Value-Added Operations:
  • Tool & Die
  • Heat Treating
  • Finishing
  • Mechanical Assembly
Slide Forming
Machine Capabilities: Wire

Maximum Diameter:  0.101 to 0.200 inches
Maximum Feed Length:  10.1 to 24.0 inches

Machine Capabilities: Strip

Maximum Thickness:  0.051 to 0.100 inches
Maximum Width:  Over 2.00 inches
Maximum Feed Length:  10.1 to 24.0 inches

Material Used:
  • Non Ferrous
  • Ferrous
Value-Added Capabilities
  • Tool & Die
  • Finishing
  • Secondary Operations
  • Heat Treating
  • Prototyping
  • In-line Tapping


PMAPrecision Metalforming Association, 6363 Oak Tree Blvd., Independence, OH 44131-2500 
Phone: 216-901-8800 —
copyright 2006
Precision Metalforming Association   All Rights Reserved   Legal Page    Privacy Policy